Drip Systems are the perfect way to water your raised beds. They are easy to install and simple to use. Drip Systems help cut down on weeds, prevent powdery mildew, can be put on a timer, and brings nutrients right to the stem.
Drip System Kit Includes:
- QTY 1-4′ Header Hose
- QTY 60′
- Tee Tape with 6″ spacing between emitters
- QTY 5 – connectors from Header Hose to Tee Tape
- QTY 1 – Header Hose End Cap
- QTY 1 Header Hose Female Hose End Adapter
- QTY 1 – Pressure Regulator
Order Your Drip System
How To Install A Drip System
- Press the attachments into the hole of the header hose.
- Next place the female receiving end on one side of the header hose and the cap on the other and then tighten them to lock into place.
- Twist the pressure reducer over the cap that your hose will attach to.
- Attach the drip cape to each of the connectors by sliding them on and tightening them up.
- Run the drip tape the length of the bed and then cut it 3 inches past the bed.
- Repeat process for all five.
- Cut 1 1/2 inches off of the end of the drip tape and fold it over itself in a ‘V’ shape.
- Slide the ‘V’ shape end into the piece of drip tape that was just cut off.
- Be sure to check the drip system for leaks
